Glossary

• Breathability

  Mattresses need to breathe. With the amount of fillings and areas of space within a mattress, they can quickly hold heat and moisture. Over time this can influence the way a mattress behaves and also effect the life span of a mattress. 
  
  Manufacturers have developed different ways of tackling the problem of Breathability in mattresses. Some brands have used vents to allow air to pass through the mattress. Some brands use state-of-the-art materials to cover the mattress, such as Coolmax or Outlast. Memory Foam has a reputation of storing heat and moisture, as foam requires heat to soften up.Memory Foam brands have overcome this problem by applying Coolmax and Outlast, they also use Open Cell technology. This technique is to simply allow the foam to settle with larger spaces between the foam cells. This allows heat and moisture to move freely without getting trapped.
  
  Some mattresses are created in such a way that they do not require any additional Breathability methods. These mattresses are generally the entry level mattresses with Open Coil spring units and not a great deal of fillings.
  
  

• Delivery

  Our deliveries are carried out by a small courier outfit called BJS Distribution. We use this company for all Double and Kingsize mattresses and Divan Beds. This service will see all goods taken to room of choice and unpacked, all packaging can be taken away for recycling (upon request). We use NIghtfreight for our smaller products (pillows and headboards etc). Delivery to the room of choice is free!
  
  We operate a next day delivery service on all our stocked items. If you order before 13:00, you can receive you new mattress, bed, pillow or headboard the following day. Delivery is free!
  
  Our couriers will speak with you to arrange a delivery timeslot, and also offer an hours notice within this timeframe. With smaller items, on Nightfreight's service, we offer 30mins notice ahead of arrival.

• Firmness

  MyNextMattress is developing a new and unique solution to the Firmness scale accuracy. Not seen anywhere else in the World, we will be measuring the Firmness of all our mattresses precisely and in detail.
  
  We are the only company in the Country that will actually measure the Firmness of a mattress and give a grading out of 10. We are always aware that choosing your next mattress can be a difficult and time consuming process, therefore we strive to give as much information as possible on every mattress we sell.
  
  The way our system works is by applying weight to a mattress. We will apply weight gradually and measure the amount the mattress dips. The more weight, the more the mattress will 'sink'. We would then measure the distance the mattress dips and plot these measurements (weight and distance) on a graph. This graph can then be used to tell us the Firmness category the mattress fits into, 7 out of 10 for instance.
  
  Our Firmness Device provides a central rod which we apply weights to, on the bottom end there is a disc which pushes into the mattress. The top of this rod supports the weights and will sink according to the 'give' in a mattress. We measure from this point.
  
  As a result of this unique technique, it will be possible for you to shop by the firmness of a mattress, this is not possible anywhere else.

• Hypoallergenic

  Put simply, Hypoallergenic materials do not cause the amount of irritation that non-hypoallergenic materials can. Hypoallergenic materials can still cause irritation in some cases, the chances of this are reduced greatly. People with severe allergies and asthma may still have problems with items called hypoallergenic, but the risk is greatly reduced.
  
  Hypoallergenic materials do not omit the same particles and fibres as other non-hypoallergenic materials. These particles are to blame for causing irritation and discomfort and in some cases the irritation can be dangerous. The Hypoallergenic properties of these materials can be created by number of techniques. Some materials (Memory Foam or Latex) are naturally hypoallergenic, others have been chemically treated.

• Open Coil

  An Open Coil spring unit is made from a continuous piece of wire. This wire can be made from various different gauges of wire, ending in differing firmnesses. The idea behind an Open Coil spring unit, or Continuous Springs as they are sometimes known, is that the spring unit can be made quickly, efficiently and therefore for little cost. Open Coil spring units tend to be the reserve of the entry level models on the market. However, some manufacturers have perfected the technique and the end result is extremely successful.
  
  A single piece of wire will be placed in a machine, bent into coils. Each coil will be joined at the top, the bottom or both and the result is a spring unit made of one wire. The reason this works well, is that the springs can support one another and share any weight or pressure across the surface. Other methods of spring units include Twin Sprung or Pocket Sprung.

• Tufted

  Tufting is a traditional and highly successful way of finishing a mattress surface. The end result makes the mattress appear to have dimples, or buttons dipping into the surface. This technique is designed to hold the surface materials together and to fix them to the core of the mattress to prevent the layers moving over time. A modern method is Spiral Tufting, which involves fixing the surface to the fillings and spring unit.
  
  The actual tuft is usually made from a cotton felt material and is fastened by a cotton or wool chord to the spring unit, in most cases. A tufted mattress will normally have a firmer surface than a non-tufted/quilted surface. The reason for this is that the Tufting process actually holds the surface material and underlying fibre layers tightly together. This will create a tighter, firmer feel than a quilted mattress.

• Turn / No Turn

  Some mattresses require turning over, to aid even settlement. Others do not require turning, but will still require rotating.

• Zoning The idea behind Zoning is to offer support where it is needed. The body has certain areas under pressure when lying flat. Zones are designed to split the mattress into sections and offer some areas more support than others. The end result will be a straight spine and pressure relieved. Some mattresses are split into 3 Zones, some into 5 Zones and some into 7 Zones and so on. The principle areas requiring support (and therefore their own individual Zones) are the head, shoulders, hips and feet.  The spine should remain level as much as possible when lying on a mattress, therefore the areas with the most weight applied should be slightly firmer to allow for the extra loading. At the same time, the surrounding areas need to compensate for this and will not be as firm to allow the spine to remain straight. The Zoning may be created by simply adding more layers of fibres where needed, or a different type of spring in certain areas. In latex or foam mattresses, it is possible to vary the density of the foam or latex to create different tensions where required. Latex mattresses can also be sculpted in certain areas to remove latex and therefore make certain areas softer.