Glossary

• Breathability

  Mattresses need to breathe. With the amount of fillings and areas of space within a mattress, they can quickly hold heat and moisture. Over time this can influence the way a mattress behaves and also effect the life span of a mattress. 
  
  Manufacturers have developed different ways of tackling the problem of Breathability in mattresses. Some brands have used vents to allow air to pass through the mattress. Some brands use state-of-the-art materials to cover the mattress, such as Coolmax or Outlast. Memory Foam has a reputation of storing heat and moisture, as foam requires heat to soften up.Memory Foam brands have overcome this problem by applying Coolmax and Outlast, they also use Open Cell technology. This technique is to simply allow the foam to settle with larger spaces between the foam cells. This allows heat and moisture to move freely without getting trapped.
  
  Some mattresses are created in such a way that they do not require any additional Breathability methods. These mattresses are generally the entry level mattresses with Open Coil spring units and not a great deal of fillings.
  
  

• Breather Vent

  See Vents.

• Delivery

  Our deliveries are carried out by a small courier outfit called BJS Distribution. We use this company for all Double and Kingsize mattresses and Divan Beds. This service will see all goods taken to room of choice and unpacked, all packaging can be taken away for recycling (upon request). We use NIghtfreight for our smaller products (pillows and headboards etc). Delivery to the room of choice is free!
  
  We operate a next day delivery service on all our stocked items. If you order before 13:00, you can receive you new mattress, bed, pillow or headboard the following day. Delivery is free!
  
  Our couriers will speak with you to arrange a delivery timeslot, and also offer an hours notice within this timeframe. With smaller items, on Nightfreight's service, we offer 30mins notice ahead of arrival.

• Fillings

  The fillings of each mattress can differ from one another, but largely they include British Lambs Wool and Cotton. Some also feature Latex, Silk and Cashmere.

• Firmness

  MyNextMattress is developing a new and unique solution to the Firmness scale accuracy. Not seen anywhere else in the World, we will be measuring the Firmness of all our mattresses precisely and in detail.
  
  We are the only company in the Country that will actually measure the Firmness of a mattress and give a grading out of 10. We are always aware that choosing your next mattress can be a difficult and time consuming process, therefore we strive to give as much information as possible on every mattress we sell.
  
  The way our system works is by applying weight to a mattress. We will apply weight gradually and measure the amount the mattress dips. The more weight, the more the mattress will 'sink'. We would then measure the distance the mattress dips and plot these measurements (weight and distance) on a graph. This graph can then be used to tell us the Firmness category the mattress fits into, 7 out of 10 for instance.
  
  Our Firmness Device provides a central rod which we apply weights to, on the bottom end there is a disc which pushes into the mattress. The top of this rod supports the weights and will sink according to the 'give' in a mattress. We measure from this point.
  
  As a result of this unique technique, it will be possible for you to shop by the firmness of a mattress, this is not possible anywhere else.

• Orthopaedic

  Orthopaedic mattresses are usually the firmest mattresses on the market. A common mistake made by those with back pain, is to assume that a firm Orthopaedic mattress will be the solution. Personal comfort and a correct diagnosis of the cause of the pain should always be saught before purchasing an Orthopaedic mattress. 
  
  Many brands have 'Ortho' mattresses. Terms used include 'Backcare' or 'Orthocare' and the theme is generally to produce a firmer feeling mattress. The idea is to create a mattress that the body can rest on without sinking in and bending the spine, causing pressure to build up. However, if a lighter person lays on a firmer mattress, they will find the spine will not align correctly as the loaded parts of the body (shoulders, hips etc) are not sitting correctly. For more information on the causes of back pain, click here or read about another solution in the Zoning description.

• Pocket Sprung

  Pocket Sprung units are an adaption of the traditional open coil/continuous spring unit. By placing each spring in its own individual 'pocket' (a fabric sock-like pouch), the spring is not joined to any other part of the mattress. The pocket that supports the spring is then joined to its neighbouring pockets and this effect creates a unique feel.
  
  By creating a spring unit in this way, it allows the springs to move independently, rather than sharing the pressure with surrounding springs. This effect allows for much more accurate contour following and a more comfortable feel overall.
  
  If you were to push your hand into a traditionally sprung mattress, the area around your hand would dip/sink too. With Pocket Springs, this sunken area is much more remote and therefore more accurately follows the contours of the pressure source. There are differences in the techniques used to create Pocket Springs, but more or less they remain the same.

• Pressure Points

  Pressure Points are created in the body when lying on a mattress which is not suitable for a persons physique. The Pressure Points are caused by putting stresses through the body. When the spine is not aligned correctly (i.e, straight), it can cause pressure to build up in the back, hips or shoulders (etc).
  
  When a bed is too soft, the body sinks in, causing certain areas to be under the strain of the rest of the body. When a mattress is too hard/firm, then the weight applied can cause the body to flex/bend in the opposite way - causing a similar problem. Hips, shoulders and so on, are requried to be sunken into the mattress slightly more than the surrounding areas, as they carry the weight. When this is not the case, the lower back may be bent to compensate. The ideal mattress is one which will keep the spine straight.

• Vents

  The small metal mesh on the side of the mattress to aid moisture and heat management.

• Warranty

  Every mattress we sell comes with at least a 12 month manufacturers guarantee, though most come with much longer guarantees. To find out what mattress warranty is included with your purchase, look out for the rosette on the top right corner of the mattress page. All new goods are sold with a minimum 12-month manufacturers guarantee. Full details are available on request. In addition to the manufacturers guarantee MyNextMattress offers a limited extended mattress warranty. This warranty varies in length item by item. You must keep all your purchase records as they will be needed in the event of a claim. The warranty is applied as follows:

  • The mattress warranty is against faults in manufacture, not wear and tear or damage.
  • The mattress must always be used with a mattress protector, turned and cleaned as per the manufacturers instructions and must be unsoiled at the time that the claim is lodged.
  • The claim must be registered with MyNextMattress by email or in writing. All details of the claim must be lodged with MyNextMattress by email or in writing.

  If the claim is accepted the following process will apply:

  • We will arrange to collect the goods and return them to us for inspection.
  • The carrier reserves the right to refuse to collect items that are not packaged suitably or which is unhygienic.
  • We may require pre payment for the costs of the collection in some circumstances.
  • If we validate the claim we will contact you to arrange the replacement goods to be dispatched to you and delivered to you on a date that is convenient for you.
  • The replacement item can be any item from our then current range.
  • The difference in price from the warranty covered item is payable by you, along with the cost of collecting the original item.

  There will be an allowance granted against the replacement item according to the following scale.

  • If the claim is validated within the first two years - 40% of the original price will be credited.
  • If the claim is validated in year three of the purchase -25% of the original price will be credited.
  • If the claim is validated in year four of the purchase - 15% of the original price will be credited.
  • If the claim is validated in year five or (if warranty is for longer than five years then any subsequent year up to the warranty period) -10% of the original price will be credited.

  The warranty is only applicable to the original purchaser and is only valid if approved by MyNextMattress. It should be considered as extra peace of mind in case of manufacturing defects that arise after the manufacturers mattress guarantee has expired. It should not be regarded as a guarantee that any item will last for any particular period of time, or as a guarantee against deterioration in performance. It is in addition to your statutory rights. There is no entitlement to a cash payment in lieu of the replacement. The replacement item must be at the same or higher price than the original.